| Page 07.07
Rudder |
|
| Step 1: Rivet together
the R-1004A and R-19004-B Bottom Rib halves using the rivets in Figure
1. |
|
| Step 2: Rivet the nut
plate to the R1005 Horn using the rivets called out in Figure 1.
Rivet the horn to the R-1004A and
R-1004B Bottom Rib halves with the rivets shown. |
|
| Step 3: Rivet the
R-608PP Reinforcement Plate to the R-1002 Spar as shown in Figure 2.
Rivet the nutplate to the reinforcement
Plate and spar using the rivets called out in Figure 2. |
|
| Step 4: Repeat step 3
for the R-607PP Reinforcement Plate (as located on Page 07.05 Figure 2)
Using the same rivets and a Additional nutplate. |
|
| Step 5: Back rivet (see
Section 5F) all the R-1015 Stiffeners to the R-1001 Skins as shown in
Figure 2, using the rivets shown on Page 07.12, Figure 3. Riveting tape,
which is very useful for holding rivets in place while back-riveting, is
available from the Van's Aircraft Catalog. |
|
